Best Plasma Cutters with Built In Compressor

Best Plasma Cutters with Built-In Compressor

Are you in the market for a plasma cutter with an integrated compressor? If so, then you’ve come to the right place. We’ll be taking a look at some of the best plasma cutters that come equipped with built-in compressors. Whether you need one for your professional welding shop or just want to do some DIY projects around the house, we’ve got you covered. Read on to find out which model is best suited for your needs!

Top 10 Best Plasma Cutters with Built-In Compressor

SUPER DEAL DC Inverter Plasma Cutter CUT 50
SUPER DEAL DC Inverter Plasma Cutter CUT 50
Check On Amazon
Hypertherm 088096 Powermax 30 with built-in compressor
Hypertherm 088096 Powermax 30 with built-in compressor
Check On Amazon
Lotos LT3500 35Amp Air Plasma Cutter
Lotos LT3500 35Amp Air Plasma Cutter
Check On Amazon
Hobart 500564 Air force Plasma Cutter with Built-In Air CompressorHobart 500564 Air force Plasma Cutter with Built-In Air CompressorCheck On Amazon
Forney Easy Weld 251 20 P Plasma CutterForney Easy Weld 251 20 P Plasma CutterCheck On Amazon
Lotos LTP5000D 50Amp Non- Touch Plasma CutterLotos LTP5000D 50Amp Non- Touch Plasma CutterCheck On Amazon
SUNCOO 50 Amp Plasma Cutter 110/220VSUNCOO 50 Amp Plasma Cutter 110/220VCheck On Amazon
HZXVOGEN 40Amp Plasma Cutter 220VHZXVOGEN 40Amp Plasma Cutter 220VCheck On Amazon
HITBOX 50A Plasma Cutter with Air PressureHITBOX 50A Plasma Cutter with Air PressureCheck On Amazon
Tosense CUT50 Air Inverter Plasma CutterTosense CUT50 Air Inverter Plasma CutterCheck On Amazon

1. SUPER DEAL DC Inverter Plasma Cutter CUT 50

SUPER DEAL DC Inverter Plasma Cutter CUT 50

Super deal plasma cutter made with high-quality material. With better and clean cuts it also protects against heat and voltage. Means with a built-in air compressor is also built with a cooling fan to dissipate heat. It’s a very light weighted product to carry anywhere as 24 lbs are its weight.

The dimensions of this cutter are about 18.5 x 11 x 13.5 inches. It can be used for a longer time than other traditional plasma cutters. Not just demand a polished surface but rather use for every type of metal. Include in one of the world’s best plasma cutters with enhanced cutting speed.


  • High Speed

This plasma cutter work on the pilot arc striking system. The cutting speed of the plasma cutter is 1.8 times higher than other cutters. After stopping the cutting air continuously blow to the metal surface between 2.5 sec to 5 sec.

  • Digital Display

Have a digital display screen to view data and read easily. Save energy at a great level and air pressure is easily readable through the front display. Have a knob to change the setting or power by rotating the knob.

  • Quality of Cuts

The maximum severance cutting thickness is about ½ inches. Use for a wide range of applications as for stainless steel, aluminum, copper, brass, and other metals like this and provide high quality, clean and soft cuts.

  • Power

The maximum amperage power is 50amp. For top-notch performance it uses 110v and for heavy-duty metals, it also uses 220v therefore known as a dual voltage plasma cutter. Users are free to plug this plasma cutter into the standard household power source.

  • One of the best energy-efficient plasma cutters
  • Highly portable and light weighted
  • Affordable
  • Use standard household power
  • Low power output in comparison
  • The maximum thickness of severance cuts is ½ inches

2. Hypertherm Powermax 30 with built-in compressor

Hypertherm 088096 Powermax 30 with built-in compressor

The build-in air compressor system of this plasma cutter help to reduce the level of noise during the cutting process. Product Dimensions are 16.5 X 7.7 X 13.1 Inches. One most interesting feature of this plasma cutter is the capacity of the lead torch that prove it better and unique than others.

Users can use it for longer hours continuously. Outstanding plasma cutter with excellent performance. Work properly either on a single-phase power supply or dual. Iron, steel, and aluminum are easily cut through it. Have a High-quality air compressor that increases the importance of Hypertherm.


  • Auto Voltage Technology

It is built with an internal air compressor and use for a lot of purposes. Use for high productivity. With auto voltage technology and adapter, it easily works on 120v to 240v power. Drag cutting arc technology makes starting simple and quick.

  • Cutting Thickness

3/8, 5/8 inches is the maximum thickness of the plate that easily cut through it and use 15amp to 30 amperage powers. Highly portable plasma cutter with superior performance. Have the strongest handle to carry it.

  • Torch Lead

It is a heavy-duty plasma cutter with 15 feet’ torch lead that allows precise cuts with the immense build quality. The torch of this plasma cutter will not affect your eyes. To protect the internal tools of the plasma cutter have a strong case.

  • Performance

Simply plug the plasma cutter with a power source, fix the work clump, and start cutting. The plasma cutter use air to cut metals means super-heated plasma out from it. It is an Interesting plasma cutter with extra features.

  • Drag cutting arc technology
  • Good quality dual voltage plasma cutter
  • Efficient and portable
  • Built-in air compressor
  • 15 feet torch lead
  • Expensive than others

3. Lotos LT3500 35Amp Air Plasma Cutter

Lotos LT3500 35Amp Air Plasma Cutter

Lotos LT3500 plasma cutter available in brown color and have a strong cover. It is an affordable, powerful, and portable source of cutting and welding. Very light weighted machine to use for business purpose and for home, 8kg or 17lbs is the weight of this plasma cutter.

It is a safe and inexpensive plasma cutter. Just take 1 minute to set up completely. Design with an efficient cooling fan system to cool down the cuts of aluminum, every type of steel, and copper. Non-hazardous compressed air use to cut metals because it has an internal compressor.


  • Purposes

The best device to save money and time because use for cutting, welding, and building of metals. It removes the need to buy different devices for different purposes rather provide all in one. It’s easy to start the cutting process.

  • Thickness of Cuts

The ideal or clean-cut thickness is 2/5 inches and the severance thickness is ¾ inches. Provide soft and smooth cuts with acceptable edges. One of the high energy-efficient products to use.

  • Power Voltage

The input voltage of this plasma cutter is 110v-120v that is enough to cut clean and severe cuts. And the amperage range is not higher than 35amp. The plasma cutter also includes an air filter regulator and a high-quality ground clamp.

  • Frequency Range

Have dual-frequency ranges that vary from 50Hz to 60Hz. This machine starts cutting with a higher frequency to cut high-quality cuts. With all other features, it also has the best range of duty cycles.

  • High-frequency range
  • Dual voltage plasma cutter
  • Very light weighted
  • Powerful plasma cutter with quick setup
  • Not have a wide range of application
  • Low thickness cutting capacity.

4. Hobart 500564 Air force Plasma Cutter with Built-In Air Compressor

Hobart 500564 Air force Plasma Cutter with Built-In Air Compressor

It is an Excellent and unique plasma cutter than the earlier model. The weight of this plasma cutter is just about 27lbs. it’s very easy to start cutting just by pull the trigger. Dimensions of air force 12ci are 16.5 x 18.5 x 11.25 inches. Not produce noise even not harm human eyes.

Provide the desired result in low time and money. Have an LED indicator to display reading about torch, temperature, and power. With all the other features it also has a post flow air control cooling system to cool the cuts faster after cutting them.


  • Cutting Capability

The cutting capacity of this plasma cutter is ideal for 1/8 inches thick surface and also use up to ¼ inches severance thickness cuts. It includes one of the high energy efficiency plasma cutters.

  • Pilot Arc System

Users are allowed to cut the metals without touching the tip with the cutting surface. The fastest and safest way to use for cutting and welding. Allow straight forward cutting without putting much effort into it.

  • Input and Output

Use 120v input and provide high-quality cuts. The amperage power of this plasma cutter is 12amp that is enough to cut 1/8 or ¼ inches thick surface. Its input and output ranges use to cut different metal and show out of the box performance.

  • Duty Cycle

Mostly this type of plasma cutter has a duty of about 30 to 60 % that is enough to cut a surface with smooth edges. The duty cycle of Air force 12ci is 35%. It helps to know how long a plasma cutter use to cut material.

  • Start with pilot arc striking system
  • Inexpensive
  • Built-in air compressor
  • High-quality torch
  • Not have a great best cutting capacity
  • Some find its air pressure weak

5. Forney Easy Weld 20 P Plasma Cutter

Forney Easy Weld 251 20 P Plasma Cutter

Forney 20p is a plasma cutter with a high-quality air compressor. The duty cycle of Forney easy weld 251 is 35%. All type of cutting requires 120v input. The amperage power of Forney is 20amp and dimensions are 15.13 x 8.13 x 12 inches. Produce little noise with minimum slag and the weight of this product is 21lbs. 20-15A adapter is also included in this plasma cutter. It does not have dual power voltage but it still uses for home and industry use because provide proper cuts with soft edges.


  • Drag Torch Technology

Work on drag torch technology as just by drag the torch nozzle with the metal surface it starts cutting. Have 8 inches ground clamps with 13 inches cutting torch, air dryer, and a high-quality regulator.

  • Cutting Thickness

The cutting capacity for aluminum is 3/16 inches or maybe high and for all other metals like steel, copper, and brass its cutting capacity is ¼ inches. It’s very easy to use this plasma cutter for every type of metal.

  • Troubleshooting Guides

Troubleshooting guides help to know about the use of a plasma cutter as solid yellow light on when on automatically when the machine needs rest. To check whether the air compressor gets a proper voltage or not it on a flashed yellow light. Flash green and red light use to check power voltage and tighten the needs of the machine respectively.

  • Compact and Light Weights

It is a very light weighted, compact, and reliable product to use for cutting purpose. Users are freely moving it from one place to another. Make the cutting process simple, affordable, and enjoyable.

  • Drag torch technology
  • Better cuts
  • Easily adjustable and affordable
  • The power source is 120v
  • Not have an ideal cutting capacity

6. Lotos LTP5000D 50Amp Non-Touch Plasma Cutter

Lotos LTP5000D 50Amp Non- Touch Plasma Cutter

Different types of material cut weld and build through it. It is as reliable, durable, effective and a convenient source to use for cutting purposes. The dimension of this plasma cutter is 15 x 6 x 12 inches. Use either for the rough or painted surface. The air compress through this plasma cutter has non-hazardous nature. A light-weighted plasma cutter with 22.5lbs. Have a longer consumable life with better quality. The frequency of this plasma cutter is 50/60Hz. Users do not face any issue while using this plasma cutter. Just take a minute to set up completely.


  • Non-Touch Pilot Arc

It allows users to cut the metal without touching the nozzle with the cutting surface. Use for every type of metal like copper, stainless steel, brass, aluminum, and many others like this. it will make your working easy and comfortable.

  • Dual Voltage Plasma Cutter

It is a Dual voltage plasma cutter with high-frequency ranges. 110-120v input uses to cut intense cuts and it’s the output range is between 10-35A. Same as for severance thickness cut 220-240v input use with 10-50A DC output.

  • Cutting Thickness

Highly portable, affordable, and non-hazardous plasma cutter with a built-in air compressor. The maximum cutting thickness is ¾ inches and the clean or ideal cuts cutting thickness is ½ inches.

  • Performance

The duty cycle of Lotos is about 60%. Because of the higher duty cycle, it performs a higher function and use for a long time continuously and also known as the best energy efficiency plasma cutter.

  • Higher amperage power
  • Non-touch pilot arc start
  • Use dual voltage power
  • Have great flexibility
  • Affordable
  • Have a low warranty
  • Slightly weak arc

7. SUNCOO 50 Amp Plasma Cutter 110/220V

SUNCOO 50 Amp Plasma Cutter 110/220V

Better and unique than many other flam control plasma cutters. Have a great capacity for heat dissipation. 25.4lbs is the weight of this product than make it easy to carry. It starts cutting with high frequency. It is a plasma cutter with high-speed airflow and an energy-efficient effect.

Increase the working time by reducing the temperature. Product dimensions are 15.6 x 6.1 x 9.8 inches. Have 8.2 inches ground cable with high-quality clamps and 12 inches torch cable. Show extremely good performance with huge cutting capacity.


  • Easy To Control

This plasma cutter does not require extra care or protection. Have an LED display screen to read temperature, voltage, and power. Users can blow air through the nozzle after cutting from 2.5 sec to 5 seconds.

  • Input Voltage

It does not need to be a professional means everyone can use it. 50amp is its amperage power and the input voltage is automatically adapted between 110v to 220v. Also, allow the Current to adjust from 20-32 to 20-50.

  • Cutting Ability

The maximum cutting thickness of suncoo 50amp is ½ inches. Use either for the thin and thick surface of the metal. Provide high-quality cuts just by using low energy. Best for steel, aluminum, iron, and copper. Provide pretty cuts with no issue.

  • Duty Cycle

The duty cycle of this plasma cutter is about 60% and the energy efficiency is 85%. Due to its higher duty cycle, its cutting capacity is 1.8 times higher than low duty plasma cutters. Have convenient straps with heavy-duty construction.

  • Highly efficient product
  • Not build up heat
  • Compact and portable
  • Easy to control with control panel
  • Better performance
  • Some find it difficult to use
  • Heavy

8. HZXVOGEN 40Amp Plasma Cutter 220V Air (CUT45)

HZXVOGEN 40Amp Plasma Cutter

The plasma cutter starts cutting through touch the nozzle with the surface of the cutting material. The clean cuts thickness or ideal thickness for cuts is ½ inches and the maximum severance cutting thickness is 3/5 inches. Use for a longer time with great protection against the current. It can do a lot of cutting in some time. Protect users from slag and produce non-hazardous compressed air. Dimensions and size of this plasma cutter are 5.9 x 15 x 9.45 inches.


  • Amperage

The amperage power or output current range of the plasma cutter is between 10amp to 40amp. And weight is 22.1 lbs. Adjust voltage and amperage easily just by rotating the knob.

  • Performance

This plasma cutter use 220v input power to cut material accurately. And the power efficiency is 85%. The duty cycle is 60%. The input frequency is varying from 50-60Hz according to the task. Users find it a reliable machine to use for metal cutting.

  • Wide Application

Have a wide range of application as best for alloy steel, copper, iron, stainless steel, aluminum and other like this. Cut thin or thick plates of metals with low struggle and end with a perfect finish.

  • Cooling Method

The airflow rate or CFM of HZXVOGEN is 6.5. A plasma cutter with a built-in air compressor and with the internal cooling system is included in the world’s best plasma cutter. The cooling method allows us to cool the material fastest after cutting.

  • Heavy-duty plasma cutter
  • Energy efficient
  • 40amp plasma cutter
  • Portable handle to carry
  • Not best for household power circuit

9. HITBOX 50A Plasma Cutter with Air Pressure

HITBOX 50A Plasma Cutter with Air Pressure

The hitbox plasma cutter has great protection against low, high, and over-voltage of current. The plasma arc striking system makes cutting effortless and comfortable. 17.72 x 13.39 x 10.63 inches are the dimensions of this product. The rated power or KVA is 6.0. Use for rough, painted, and rusty metal surface but rather provide smooth cuts for every metal. Not need an external air compressor.


  • Thickness

The maximum cutting severance thickness of HIT box 50A plasma cutter is 5/8 inches and the thickness of the clean or ideal cut is ½ uses to cut thin or thick metal in a balanced flow without breaks.

  • Current Voltage

The input and output power voltage of this plasma cutter is 220v and 50 amps respectively. High input voltage does not mean that it is not an energy-efficient plasma cutter rather it is one of the best products to use for cutting, welding, and building of metals.

  • Built-In Air Compressor

A lot of plasma cutters are made with an internal air compressor but it’s important to find a good machine for better production. So HITBOX has an excellent air compressor that provides the best quality compressed air. Suitable for every metal.

  • Highly affordable
  • Easy to use
  • Touch plasma arc starting
  • 50amp output range
  • Use for a lot of purposes
  • Have Complex setting

10. Tosense CUT50 Air Inverter Plasma Cutter

Tosense CUT50 Air Inverter Plasma Cutter

The torch of this plasma cutter works within 30amp -50amp and requires less maintenance, cleaning, and use nontoxic gases. The air compressor fits in this plasma cutter has the capacity to control the whole cutting process if the external compressor does not work properly. Best to use for small business, home, and factories purpose. Compare with other plasma cutters it has a fast cutting torch. Not create any type of problem during the cutting process.


  • Cutting Speed

Work efficiently with high cutting speed as use 110 v /220v for every type of metal and the input voltage of the machine change by the thickness of metal. It’s convenient and easy to carry and operate.

  • Quality of Cuts

To get smooth edges and equal cuts of metals it is a perfect tool. Provide clean cuts of ½ inches thick metal easily by using the frequency range of about 50Hz to 60Hz. Air pressure is 60-70PSI.

  • Energy Efficient

It is added is a list of best plasma cutter with built-in air compressors because have 85% energy efficiency. And the duty cycle is about 100% at 30amp and 60% at 50 amp means it changes with the setting of amperage.

  • Easy to Move

It’s very easy to set up all the parts of the plasma cutter within a few seconds or in a minute. The overall weight of the machine is 17lbs which makes it easy to handle and move from one location to another.

  • Weight is just about 17lbs
  • The high cutting speed with high efficiency
  • Outstanding performance
  • Use Safe and secure compressed air
  • May require replacement of internal tools after a year

Buying Guide

If you are looking for the best plasma cutter then these buying guides will make you able to select the right product. Buying guides is a way to create a comparison between good and bad products. You can select a product that has all these features or have some of them. Must find these factors in the plasma cutter before investing money on it.

  • Built-In Air Compressor

It may be expensive to buy a plasma cutter with a built-in air compressor but it’s a more convenient gadget to use. Users simply plug the plasma cutter with a power source and start cutting without placing an external compressor or air hose with a cutter.

  • Power

Amperage current plasma cutter is best to choose for getting high-quality cuts within a wide power range. Different amperage powers of a machine allow users to cut metal with different thicknesses. Amperage power of plasma cutters like 12A, 25A, 30A, 40A, or 50A specifies the thickness of metal that this machine able to cut.

  • Energy Efficiency

Check the energy efficiency of a plasma cutter as it must have 60% efficiency but a machine with 80- 85% efficiency is best. Because a plasma cutter with proper energy efficiency power saves money by lowering electricity expenditures. Also, try to check the design and weight of the machine.

  • Input Voltage

Make sure to check the input voltage of a plasma cutter before buying. For heavy-duty tasks the best voltage for a plasma cutter is 220-24V but for simple cutting task plasma cutter with 1120- 120V is enough to buy. Match the feature with the requirement of a tool is the best way to get desired outcomes.

  • Cutting Depth And Capability

To cut metals, plasma cutters provide 2 types of thickness cuts as ideal cuts and severance thickness cuts. Different machines have different thicknesses for clean and severance cuts as ½, ¼, 1/8, and ¾, 3/8, and 3/16 thickness cuts respectively.

  • Duty Cycle

The duty cycle is a factor to know about the working time of a plasma cutter. For how much time a plasma machine can work means know about the time period for the continuous working of a plasma cutter. The best plasma cutter can work for few minutes easily without building up heat. The higher the better means select a cutter within 30%-60% range of duty cycle.

  • Easy to use

It should be easy to use or should have a simple method to start cutting. Most users choose a plasma cutter with extra features but they don’t know how to start or use it. So a plasma cutter with a simple design and easy starting best to provide high-quality cuts in low time without putting much effort into it. Everything reading and power setting should be labeled and understandable.

  • Pilot Arc or Touching Tip

You are free to choose a plasma cutter even with a pilot arc system or touching tip system. But the better one is the pilot arc plasma cutter because it removes the need to touch the tip of the cutter with the metal surface. Use for painting, rough, or rusty every type of surface.

  • Frequency Range

The average frequency range of a plasmas cutter is between 10 kHz- 200 kHz. A plasma cutter with a built-in air compressor will fulfill all the needs of the users. It is a safe and secure appliance to use for metal cutting without harms the eyes and other body parts of a user.

  • Cutting Quality

Check the cutting quality of a plasma cutter should be a part of checking. A machine with high amperage power, high efficiency, and high duty cycle and average frequency range is best to select for clean cuts with smooth and soft edges. This type of plasma cutter gives excellent results.

Almost every plasma cutters discuss in this writing have all these features or may have a combination of some. So you can select any of the plasma cutters because it will not disappoint you.

Bottom line

A plasma cutter with a built-in air compressor is very portable than the other plasma cutter with an external compressor. This content will help you a lot in finding the great collection of cutting machines. Using this plasma cutter is not necessary to be a professional because it is even useful for professional, and non-professionals users. All the products have fast cutting speeds, consume low power energy, and provide safety and protection for the users.

The working of the machine is out of the box to provide clean and equal cuts. These plasma cutters are easily affordable for hobbyists, mechanics, welders, house purposes, and construction workers. Also, have some guidelines or things to consider before buying the best plasma cutter. With good features, every product has some downsides so you can choose a machine that fits according to your requirements.

Related Posts:

Leave a Reply